Cristina Casellas, Technology Transfer Manager from Eurecat, has attended the workshop “How functional and additive printing impact the world of packaging and logistics”, organised on November 28th, 2023, by the Functional Print Cluster, 3NEO Platform…
Partners from Tecnopackaging have attended the EU Industry Days, celebrated on October 4th-6th, 2023, in the Trade Fairs and Congress Center of Málaga (Spain). Lidia Garcia, R&D engineer at Tecnopackaging, discussed the research lines that…
Laura López Mir, researcher at Eurecat and MADRAS technical coordinator, has shared the main outcomes of the MADRAS project during the launch of the Helix Community on Printed Electronics, hosted online on September 21st, 2023,…
Paula Pinyol, project partner from Eurecat, has participated in the 16th International Symposium on Flexible Organic Electronics (ISFOE23), celebrated in Thessaloniki (Greece) on July 3rd-6th, 2023. During the event, she exhibited a poster based on…
Jon Eggert Carlé, a representative of the MADRAS partner infinityPV, shared some of the achievements collected by the project during the 15th International Symposium on Functional-pi Electron Systems (Fπ15), held on June 17th-21st, 2023, in…
Gael Deprës and Arnaud Benard, project partners from Fedrigoni, have attended the TAPPI Nanotechnology Conference, celebrated on June 12th-16th, 2023, in Vancouver (Canada). During the event, they exhibited a poster based on MADRAS research entitled…
Project partners Ignasi Burgués, from Eurecat, Roar Rønnow Søndergaard and Jon Eggert Carlé, from infinityPV, shared achievements of the MADRAS project at the 15th International Conference on Hybrid and Organic Photovoltaics, which took place on…
Gaël Depres and Arnaud Benard, project partners from Fedrigoni Paper, have attended the NOT-NANO DAY, a one-day conference celebrated in Vancouver (Canada) on June 9th, 2023. The event was co-hosted by the BioProducts Institute of…
The MADRAS project has been disseminated by project coordinator Eurecat during the Food4Future expo that took place on May 16th-18th, 2023, in Bilbao (Spain). In particular, Eurecat exhibited the geotracking flexible tag developed within the…
MADRAS coordinator Eurecat has exhibited results of the project to the Advanced Factories Expo & Industry 4.0 Congress, a leading event in the industry sector that took place from April 18th-20th, 2023, in Barcelona (Spain).…
The MADRAS consortium has gathered in the facilities of UWINLOC in Toulouse (France) to celebrate their sixth Project Board on March 23rd, 2023. During the meeting, all partners presented their work done in the previous…
Project partners Eurecat and Fedrogoni Paper have presented MADRAS during this year’s edition of LOPEC, the flagship event in Europe for the printed electronics industry, celebrated on March 1st-2nd in Munich (Germany). On the one…
Benjamin Dhuiège, partner from GenesInk, has disseminated the MADRAS project during the CES 2023 event, celebrated on January 5th-8th at the Las Vegas Convention Center (United States). Precisely, he presented different demos for the development…
Partners from Eurecat Laura López, MADRAS technical coordinator and researcher at the Functional Printing and Embedded Devices Unit, and Enric Fontdecaba, Head of the Polymeric Materials Unit, have hosted a MADRAS workshop organised within the…
As part of its standardisation activities, the MADRAS project has kicked off a CEN-CENELEC workshop on advanced materials and processing in organic electronics. The initial meeting was held on November 2nd on an online format.…
MADRAS partners have reunited face-to-face for their 5th Project Board, hosted by the University of Pardubice, in Czech Republic. The meeting was celebrated on October 20th-21st. During the meeting, representatives from each partner presented the…
Tomas Syrový, Head of the Department of Graphic Arts and Photophysics at the University of Pardubice, has presented a scientific paper based on MADRAS research at the Iarigai/IC 2022 conference, celebrated between September 19th-23rd at…
A scientific paper related to MADRAS project research has been presented in the IEEE International Symposium on Antennas & Propagation (AP-S/URSI 2022), which has run in Denver from July 10th-15th in a hybrid format. The…
Project partner Laura López, researcher from the Functional Printing and Embedded Systems Unit at Eurecat, presented MADRAS in the IEEE FLEPS 2022 International Conference on Flexible, Printable Sensors and Systems celebrated on 10th-13th July in…
MADRAS partners have held the fourth Project Board this Tuesday 14th of June in the facilities of project coordinator Eurecat in Barcelona. This meeting represents the first face-to-face encounter between MADRAS partners since the project…
Gaël Depres, project partner from Arjowiggins, has disseminated MADRAS this Thursday 7th of April in a round table about plastronics during the Scientific Day of the MINT Chair of Industrial Excellence, an event organised by…
MADRAS project has been disseminated in the Advanced Factories 2022 Congress, which has taken place from March 29-31 in Barcelona, Spain. Eurecat has included MADRAS into its corporate catalogue, distributed to all atendants approaching its…
MADRAS partners from UWINLOC and from Genesink have participated in LOPEC 2022, which has taken place from 22th-24th of March in Munich, Germany. Researcher Alassane Sidibe has represented UWINLOC, whereas Benjamin Dhuiège, R&D project manager,…
Laura López, researcher at the Functional Printing & Embedded Devices Unit in Eurecat, has recently participated in the European Forum for Electronic Components and Systems – EFECS 2021, which took place in an online format…
MADRAS partners from Genesink have recently participated in Slush 2021, which took place from 1-2 of December in Helsinki, and CES 2022, celebrated from 5-7 of January in Las Vegas. In the framework of these…
MADRAS partners from UWINLOC have participated in the North Star Dubai Congress, the redefined GITEX Future Stars, which took place from 9th to 12th of October 2021, in Dubai. During the event, representatives from UWINLOC,…
MADRAS project has been represented in the SIDO Lyon Conference, the Europe’s leading IoT, Artificial Intelligence, Robotics and XR technologies event, which took place from 22nd – 24th of September 2021. During the event, UWINLOC…
MADRAS project has been presented in the 9th Annual World Congress of Advanced Materials (WCAM2021), which took place from August 26th – 28th in Dalian, China. Vanesa Martínez-Nogués PhD, European R&D Project Manager at Tecnopackaging,…
MADRAS project has been represented in the International Summer School on Nanoscience & Nanotechnologies, Organic Electronics & Nanomedicine (ISSON21) organised by NANOTEXNOLOGY from the 3rd to the 10th of July. Dr. Laura López Mir, researcher…
Marta Sanz, researcher at the Functional Printing & Embedded Devices Unit at Eurecat, has presented the poster “Fabrication of organic near-infrared photodetectors by coating” during the Emerging 2021 school on Functional Advanced Materials for Emerging…
The MADRAS project has been presented during the IEEE International Conference on Flexible, Printable Sensors and Systems (FLEPS 2021), which took place in an online format from 20th – 23rd of June. The conference had…
MADRAS partner Benjamin Dhuiège, R&D project manager at GenesInk, has participated at the LOPEC 2021 Conference, which took place in an online format from 23rd – 25th of March. During the Conference, Benjamin Dhuiège delivered…
The MADRAS project has been presented at the International Virtual Workshop on “CRM Innovations Frontiers, organised by the EIT RawMaterials trough the Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA) on…
MADRAS partners have met online for the project’s 1st Consortium Meeting on 7th of October 2020. During the meeting, partners have reviewed the project tasks done during the past 6 months and discussed next steps and…
MADRAS project has joined the Digital Showcase, an online platform launched by the EU-funded project 5E with the aim to increase visibility and new opportunities for European electronics products, specifically whose innovative character builds on…
The MADRAS project has kicked off on April 7th 2020, with the objective to develop new materials and manufacturing processes for a scalable production in an industrial level of OLAE devices. The project addresses the use…